All Collections
Self-Access Locks & Lockboxes
CodeBox
Help phone number on CodeBox lockboxes
Help phone number on CodeBox lockboxes

How do I update the phone number that displays on the CodeBox lockbox?

Brandon Anderson avatar
Written by Brandon Anderson
Updated over a week ago

You will need your six digit "Agent Code" to update the phone number that displays on the screen in the case of an entry error.

  1. Type agent code then press the [Enter] button.

  2. You'll see the current time setting scroll across the screen.

  3. Wait 5 seconds until the screen says Select CMD: at the top.

  4. Press the [4] button to go to the Agent Code section then press the [Enter] button.

  5. Update the phone number then press the [Enter] button.

  6. Press the [0] button to exit.

Note: Anytime you are at a display screen that says SELECT CMD if 0 is pressed it will take you back to a blank screen. If you are in a field that changes numbers, if 0 is hit, it will insert a 0 into the field. Please be careful when trying to exit as this could change information.

Check out the collection of articles below for more resources around lockboxes:

Self-Access Locks & Lockboxes

Did this answer your question?